What do you get?
- Apple HomeKit certified, KNX certified
- Plug & Play installation + automatic configuration
- Onboard memory
- DIN-rail mount possible
- Local connectivity
- Industry grade security
Connect Apple HomeKit to your Loxone smart home.
Set up in 5 minutes, with no technical knowledge.
Once you have copied a few information from your KNX mobile app, 1Home will setup itself automatically with your KNX home server through device auto-detection.
Loxone Miniserver GO.
We are the bridge.
1Home Bridge doesn’t need to be installed in your electrical cabinet; (although it can be); you don’t need a certified professional to install it for you. Simply plug & play the device and keep it in a drawer next to your router.
1Home Bridge will automatically set itself up with your wired smart home. The device is equipped with our automatic device detection algorithm that will make the setup experience as smooth as possible.
The Homepod Assistant supports:
To turn on/off a light
Query the light status
Set a light brightness to a certain percentage
Dim a light
Brighten a light
Dim/Brighten lights by a certain percentage
Turn on/off all lights in room
Turn on/off all lights
To set the temperature to all thermostats
To set thermostat using the thermostat's room name
To set the thermostat using the thermostat’s name
To hear the ambient temperature on the thermostat
To hear what the temperature is set to on the thermostat
Increase/decrease the temperature on all thermostats (for 1 degree)
Increase/decrease the temperature using the thermostat's room name
Increase/decrease the temperature using the thermostat's name
Increase/decrease the temperature for X degrees/specific thermostat
To switch heating or cooling modes for all rooms modes¹
To switch heating or cooling for a specific room
To set the mode and temperature
¹ Please note: This command changes the mode to auto heat/cool mode. In order for this command to work, the Smart home has to support auto mode.
To fully open the blinds
To fully close the blinds
Query the blind status
Set the blinds to a certain position
Increase binds by a certain percentage
Decrease blinds by a certain percentage
To turn on/off a switch/plug
Query the switch/plug status
Activate a scene
Deactivate a scene
Any device with supported Siri Voice Assistant will work with our product, including: any iPhone, any iPad, any Apple Watch, HomePod.
Yes, you can use all popular Voice Assistants with the 1Home platform. See this article to learn how to enable more of them.
The connection between your Smart home server and our cloud system is end to end encrypted using SHA512 encryption algorithm. Each device is in house provisioned with a certificate securely stored on the device. Upon each Smart home server connection, we put an additional layer of security which prevents anyone from monitoring the communication between your Smart home server and voice assistant.