1Home IoT Gateway - Quick start ​

Bring IoT devices to KNX and link them with group addresses within ETS.

Quick Setup ​

Table of contents

1. Installation ​

🎬 Video guide

To start using your device you need to provide it with power and connection to your network.

Connecting to power ​

There are two options to connect your device to power:

• A - Auxiliary power: Use the yellow and gray pin to connect to auxiliary power. Normal usage at 30V is around 70-100 mA, max usage is up to 170 mA. Note that if the power supply can't supply enough power for all connected devices it might cause unexpected behavior.
• B - DC IN power supply: Connect a dedicated 12V, 2.1 mm, 1A (or more), 12W power supply.

Accessing the dashboard ​

Once the device is powered on and the STATUS LED light is solid green color 🟢 you can access your 1Home Server at 1home.local URL.

If you have troubles accessing the dashboard, read the Troubleshooting guide.

You should be presented with the login screen as shown below.

Default username and password are printed on the label that you received with the device. Consider changing them after you log in.

2. Connecting KNX ​

🎬 KNX video guide: Add device manually, ETS auto detection

Your device is automatically connected to your KNX bus via the red and black pin.

You can also always add up to 4 additional connections to KNX via KNX IP interfaces. Learn more in the Connect to KNX guide.

You can check the connection status of your device under Integrations -> KNX as shown below.

3. Pair Matter devices to 1Home ​

Follow our guide on how to pair Matter devices to 1Home.

4. Link Matter devices directly to KNX group addresses in ETS ​

Follow our detailed guide for step by step instructions.

5. Configure device remotely ​

If you need to configure your 1Home device remotely use our 1Home remote dashboard at 🌍 remote.1home.io.

Follow our Remote access guide to get started.

6. Discover more features ​

• Automations - a simple yet powerful way to create automations.
• KNX Time Server